X-CERA HT: High strength and translucency, apply to coping, coping bridge, all kinds of bridges!
XTCERA Zirconia blocks are dedicated to being used in the Dental laboratory or milling center field to make crowns or copings for final restoration in the aesthetic zone. It is a consumable required by specific CADCAM milling system machine. By itself it is presintered zirconia blank.
1. Open CAD CAM system like Roland, Wieland, Imes icore, VHF, Arum, Schutz, Yenadent, Sirona MCX5 and etc.
2. Zirkonzahn CAD CAM system.
3. Amann Girrbach CAD CAM sytem.
Chemical Composition
| Component | Content |
| ZrO2+HfO2 | ＞90.5wt% |
| Y2O3 | 9.28wt% |
| AL2O3 | ＜0.5wt% |
| Other Oxides | ＜0.5wt% |
Properties
| Projects | Detection result |
| Sintering Density | ≥6.0g/cm³ |
| Bending Strength | ≥750MPa |
| Vickers Hardness | 1250HV |
| Chemical Solubility | ＜100μg/m² |
Sintering program:
Show case:
Specification:
The Zirconia blank is made from biocompatible zirconium dioxyde. The yttrium oxide stabilizing protects the material against cracks and increases the tensile and compressive strength.
The special grain size allocation inside the material and the added aluminium oxide also result in extra strength during milling and subsequently in clinical use.
Company profile:
XTCEAR was founded in 2001,owning 20 years' R&D experience on Zirconium Dioxide Ceramic Material and Industrial CNC Milling Machine. As a member of Aviation Industry of China(AVIC), XTCERA has 1400 employees and over 30,000 square meters R&D and production base.
Product Tags:
|
|
CAM System 89mm Translucent Dental Zirconia Block Disc Images
|
